A slab-on-grade foundation is the most common foundation type in Arizona, and for good reason — it is efficient, cost-effective, and well-suited to Arizona's climate when installed correctly. But 'correctly' in Arizona means something specific: proper soil assessment, sub-base preparation engineered for Maricopa County's expansive clay, correct reinforcement, and a concrete mix designed for extreme heat curing.
Ares & Eros Contracting has been building slab-on-grade foundations for Arizona residential and commercial construction for over 15 years. Our military background means we plan every foundation project like a mission — assess, engineer, execute, verify. No shortcuts that compromise structural integrity.

A foundation is the most critical concrete pour on any building project. We treat it that way on every job.
ROC363389 CR-9 Licensed
Veteran-Owned (SDVOSB)
Licensed · Bonded · Insured
Free Estimates
WHAT WE OFFER
Every slab-on-grade foundation project Ares & Eros Contracting takes on is engineered specifically for Arizona's conditions. Here is the full range of work we deliver:
Residential Slab Foundations
Single-family homes, additions, and ADUs. Designed per structural drawings with correct rebar, thickened edges, and moisture protection for Arizona conditions.
Commercial Slab Foundations
Office buildings, retail, light industrial. Engineered in coordination with structural and civil plans. Insurance certificates and schedule coordination for GC projects.
Thickened Edge (Monolithic) Slabs
The most common Arizona residential foundation type — slab and foundation beam poured as a single unit. Efficient and effective for residential construction.
Post-Tension Slab Foundations
For challenging soil conditions or larger spans. Post-tensioned slabs provide superior resistance to differential settlement from Arizona's expansive clay soils.
Stem Wall Foundations
Perimeter stem walls with interior slab. Used when crawl space access is needed or where soil conditions require deeper footing placement.
Foundation Repairs & Underpinning
Stabilization of existing foundations affected by soil settlement, clay heave, or poor original installation. Assessment and engineered repair approach.
Arizona's expansive clay soils are one of the primary causes of foundation failure in the state. Here is what sets Arizona foundation work apart:
• Expansive clay (montmorillonite): Maricopa County soils can exert 10,000+ pounds of pressure per square foot when saturated. Foundation design must account for this through post-tensioning, deeper footings, or soil treatment.
• Pre-wetting protocols: in some Arizona soil conditions, pre-wetting the sub-base before pouring reduces post-pour swelling. We assess whether this is appropriate for your site.
• Rebar versus post-tension: the choice depends on soil report findings, structural loads, and budget. We advise on both options with specific engineering rationale.
• Moisture barriers and insulation: Arizona slab foundations require proper moisture barriers to prevent efflorescence and floor covering failures, and thermal breaks where energy efficiency is a priority.
• Concrete mix for heat: high-temperature curing in Arizona summer reduces concrete strength if the mix is not formulated correctly. We use fly ash and plasticizers to extend workability and ensure full hydration.
OUR PROCESS
We run every concrete slab installation project with the same discipline and sequencing we learned in the military. No improvisation. No shortcuts. Every step serves the mission.
We review the geotechnical report for your site. If no report exists, we recommend obtaining one — it is essential for correct foundation design in Arizona.
We work from structural drawings or coordinate with the project engineer to confirm rebar schedule, slab thickness, and edge beam dimensions.
Site excavated to plan depth. Grade established per drainage design. Unsuitable material removed and replaced.
Compacted aggregate base installed. Poly moisture barrier placed over the entire slab footprint with lapped and sealed seams.
Perimeter and beam forms set. Full rebar cage assembled per structural drawings. Chairs placed at correct height for cover requirements.
We walk the formed area before ordering concrete — checking reinforcement, form alignment, embedments, and sleeves for MEP trades.
Foundation poured, consolidated in beams, and screeded to specified elevation. Finish troweled smooth for flooring installation.
Curing compound applied. Backfill timing coordinated with general contractor to protect form integrity during initial cure.
Foundation pricing depends on slab dimensions, thickness, reinforcement type (rebar vs. post-tension), and soil conditions.
Below are typical Arizona ranges:
• Monolithic slab — standard residential:
$7 – $12 per sq ft.
Includes thickened edges, rebar, moisture barrier, finish.
• Post-tension slab foundation:
$10 – $16 per sq ft.
Higher material and engineering cost, but superior performance in expansive soils.
• Commercial slab foundation:
$9 – $15 per sq ft.
Varies by load requirements and engineering specification.
• Stem wall foundation:
$12 – $20 per sq ft.
Additional formwork and concrete for perimeter walls.
• Soil pre-treatment (if required):
$1 – $4 per sq ft additional.
Lime stabilization or pre-wetting for problematic clay sites.

All pricing is based on scope, site conditions, materials, and finish selection. Ares & Eros Contracting provides transparent, detailed written estimates with no hidden fees. Contact us for your free, no-obligation quote.
Our military background means we do not improvise on structural work. Every foundation project is planned from soil conditions up, executed to structural drawings, and inspected before concrete is ordered. General contractors throughout Arizona rely on us for schedule adherence and documentation.
✓ ROC363389 CR-9 licensed — concrete contracting specialization
✓ SDVOSB — service-disabled veteran-owned
✓ Works from structural drawings and coordinates with project engineers
✓ Insurance certificates and daily reporting for GC projects
✓ 15+ years of Arizona foundation experience across residential and commercial scopes
A slab-on-grade foundation is a concrete slab poured directly on prepared ground that serves as both the building's floor and its structural foundation. It is the most common foundation type in Arizona because the climate eliminates the need for a frost-depth footing required in colder states.
Standard residential slab-on-grade foundations in Arizona typically cost $7 to $12 per square foot for monolithic (thickened edge) design. Post-tensioned slabs, which perform better in Arizona's expansive clay soils, cost $10 to $16 per square foot. Contact Ares and Eros Contracting for a free estimate.
Arizona's expansive clay soils require specific foundation engineering: either post-tensioning to resist clay movement, pre-treatment of the sub-base to reduce expansive potential, or deeper footings that extend below the active zone of soil movement. We review the geotechnical report for your site before recommending an approach.
Site preparation, forming, and reinforcement for a standard residential foundation typically takes 2 to 4 days. The pour itself takes 1 day. Concrete reaches walkable strength in 24 to 48 hours and structural strength at 28 days. Full construction loading should wait until the 28-day strength is reached.
Explore our full range of concrete construction services for your Arizona project:
"Dependable and detail-oriented"
"We've worked with Ares & Eros Contracting on multiple residential construction projects, and they’ve proven to be dependable and detail-oriented."
- Builder Review (Construction Partner)

"Completes work on schedule"
"As a general contractor, it's hard to find subcontractors you can consistently rely on, but Ares & Eros Contracting has been great to work with. Their team shows up prepared, communicates well with our project managers, and completes work on schedule."
- General Contractor Review (Subcontractor)

"Experience was outstanding"
"We hired Ares & Eros Contracting to install a concrete patio in our backyard, and the entire experience was outstanding."
- Homeowner Review (Patio Project)

Our team is here to answer your questions and help you get started on turning your vision into reality.
Our focus is on delivering every project with precision, professionalism, and a client-first mindset.
Backed by years of hands-on experience, we bring expertise to every detail.
We honor your time and budget, completing projects efficiently without compromising quality.
Our responsive team is always ready to guide you through every step of the process.
At Ares and Eros Contracting, we take pride in the quality of our work, a legacy of completed projects, and the trust of our valued clients. With every build and renovation, we aim to exceed expectations through unmatched craftsmanship and commitment.
© 2026. Ares and Eros Contracting. All Rights Reserved.